Whirlpool  WED97HEXW Посібник користувача - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник користувача для Сушарка Whirlpool  WED97HEXW. Whirlpool  WED97HEXW 24 сторінки. Electronic dryer
Також для Whirlpool  WED97HEXW: Інструкція з експлуатації (8 сторінок), Інструкція з використання та догляду (36 сторінок)

Whirlpool  WED97HEXW Посібник користувача

CONNECT vENT

1.
connect vent to exhaust outlet
Using a 4" (102 mm) clamp, connect vent to exhaust outlet
in dryer. If connecting to existing vent, make sure vent is
clean. Dryer vent must fit over dryer exhaust outlet and inside
exhaust hood. Check that vent is secured to exhaust hood
with a 4" (102 mm) clamp.
2.
move dryer to final location
Move dryer to final location, taking care not to crush or
kink vent.
After dryer is in place, remove corner posts and cardboard
from under dryer.

LEvEL DRYER

1.
level dryer
Place
level here
Check levelness of dryer from
side to side. Repeat from front to back.
noTE: The dryer must be level for the moisture sensing system
to operate correctly.
Not Level
2.
Adjust leveling legs
If dryer is not level, prop up using a wood block, use wrench
to adjust legs up or down, and check again for levelness.
Once dryer is level, make sure all four legs are snug against
the floor and dryer does not rock.
lEVEl
Not Level
17