Whirlpool WGD4900XW Інструкція з монтажу Посібник з монтажу - Сторінка 22

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Сушарка Whirlpool WGD4900XW. Whirlpool WGD4900XW 48 сторінок. 29" and 27" wide models
Також для Whirlpool WGD4900XW: Інструкція з експлуатації (8 сторінок), Інструкція з використання та догляду (28 сторінок)

10.

Remove door strike

Remove door strike from dryer cabinet and set aside.

11.

Remove and transfer plugs

Remove the 4 screws that attach 2 plugs on the left side.

Transfer plugs to opposite side using the same 4 screws.

12.

Insert screws in hinge holes on

dryer cabinet

NOTE: 2 people may be needed to reinstall door.

Insert screws into the bottom holes on left side of dryer

cabinet. Tighten screws halfway. Position door so large end of

door hinge slot is over screws. Slide door up so screws are in

bottom of slots. Tighten screws. Insert and tighten top screws

in hinges.

13.

Remove door strike plug

Remove door strike plug. Insert the door strike removed in

Step 10 into hole and secure with screw. Insert door strike

plug into original door strike hole and secure with screw.

14.

Check door strike alignment

Close door and check that door strike aligns with door catch.

If it is needed, slide door catch left or right within slot to

adjust alignment.

Troubleshooting

See the Use and Care Guide or visit our website and

reference "Frequently Asked Questions" to possibly avoid

the cost of a service call.