Whirlpool 29" Wide Models Інструкція з монтажу Посібник з монтажу - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Сушарка Whirlpool 29" Wide Models. Whirlpool 29" Wide Models 48 сторінок. Dryer
Також для Whirlpool 29" Wide Models: Інструкція з монтажу Посібник з монтажу (20 сторінок), Інструкція з монтажу Посібник з монтажу (22 сторінок)

Друкувати сторінку

Electric Dryer Power Hookup –

Canada Only

Electrical Requirements

It is your responsibility:

To contact a qualified electrical installer.

■

To be sure that the electrical connection is adequate

■

and in conformance with the Canadian Electrical Code,

C22.1-latest edition and all local codes. A copy of the

above codes standard may be obtained from: Canadian

Standards Association, 178 Rexdale Blvd., Toronto, ON

M9W 1R3 CANADA.

To supply the required 4 wire, single phase, 120/240 volt,

■

60 Hz., AC only electrical supply on a separate 30-amp

circuit, fused on both sides of the line. A time-delay fuse or

circuit breaker is recommended. Connect to an individual

branch circuit.

This dryer is equipped with a CSA International Certified

■

Power Cord intended to be plugged into a standard 14-30R

wall receptacle. The cord is 5 ft. (1.52 m) in length. Be sure

wall receptacle is within reach of dryer's final location.

4-wire receptacle (14-30R)

Do not use an extension cord.

■

If using a replacement power supply cord, it is recommended

that you use Power Supply Cord Replacement Part Number

8579325. For further information, please reference the

"Assistance or Service" section of the "Use and Care Guide."

GROUNDING INSTRUCTIONS

For a grounded, cord-connected dryer:

This dryer must be grounded. In the event of malfunction or

breakdown, grounding will reduce the risk of electric shock

by providing a path of least resistance for electric current.

This dryer is equipped with a cord having an equipment-

grounding conductor and a grounding plug. The plug must

be plugged into an appropriate outlet that is properly

installed and grounded in accordance with all local codes

and ordinances.

WARNING:

Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a quali ed electrician or service representative

or personnel if you are in doubt as to whether the dryer is

properly grounded. Do not modify the plug provided with

the dryer: if it will not t the outlet, have a proper outlet

installed by a quali ed electrician.

SAVE THESE INSTRUCTIONS

Gas Dryer Power Hookup

Electrical Requirements

120 Volt, 60 Hz., AC only, 15- or 20-amp fused electrical

■

supply is required. A time-delay fuse or circuit breaker is

recommended. It is also recommended that a separate

circuit serving only this dryer be provided.