Whirlpool 7MWGD2040 Інструкція з монтажу Посібник з монтажу - Сторінка 39
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Сушарка Whirlpool 7MWGD2040. Whirlpool 7MWGD2040 44 сторінки. Electric/gas dryer
Також для Whirlpool 7MWGD2040: Інструкція з використання та догляду (32 сторінок)
Друкувати сторінку
Plan Vent System
Recommended exhaust installations
Typical installations vent the dryer from the rear. Other
installations are possible.
A
A. Dryer
F. Rigid metal or flexible metal vent
B. Elbow
G. Vent length necessary to connect elbows
C. Wall
H. Exhaust outlet
D. Exhaust hood
I. Optional side exhaust outlet
E. Clamps
Standard rear offset exhaust installation
B
C
D
E
F
G
B
H
I
Alternate installations for close clearances
Venting systems come in many varieties. Select the type best for
your installation. Two close-clearance installations are shown.
Refer to the manufacturer's instructions.
Over-The-Top installation (also available with one offset elbow)
Periscope installation
NOTE: The following kits for close clearance alternate
installations are available for purchase.
Special provisions for mobile home installations:
The exhaust vent must be securely fastened to a noncombustible
portion of the mobile home structure and must not terminate
beneath the mobile home. Terminate the exhaust vent outside.
Determine vent path:
■ Select route that will provide straightest and most direct path
outdoors.
■ Plan installation to use fewest number of elbows and turns.
■ When using elbows or making turns, allow as much room as
possible.
■ Bend vent gradually to avoid kinking.
■ Use as few 90° turns as possible.
39