Whirlpool 8120 Короткий довідник - Сторінка 2

Переглянути онлайн або завантажити pdf Короткий довідник для Сушарка Whirlpool 8120. Whirlpool 8120 15 сторінок. Electric/gas dryer

Друкувати сторінку

POWER

Touch to turn on/off or to stop/cancel a cycle.

WHAT TO DRY/HOW TO DRY

First select a cycle from the "What to dry" and then select the

"How to dry" to get the best combination cycle available for the

type of items you are going to dry. See "Cycle Guide" for cycle

details.

START/PAUSE

Touch and hold; cycle will start after countdown.

Touch START/PAUSE during a cycle to pause it. Touch again to

resume.

MODIFIERS (Not all cycles and options are available on all

models.)

NOTE: Dryer remembers the last completed cycle and cycle

settings. The next time you turn dryer on, it will be set to run the

last cycle.

Temp

Touch to modify the cycle's available temperatures (Air Only,

Low, Medium, Medium High, High). Follow garment label

instructions for best results. Once a cycle has started, the

temperature can be changed within the first 5-8 minutes.

Dryness

Touch to modify the cycle's available dryness levels on the

sensor cycles (Less, Normal, More).

NOTE: Dryness is for use with Automatic Cycles only.

Wrinkle Shield™ Option

Touch to turn on/off and on with steam (select models). Wrinkle

Shield™ option adds up to 150 minutes of periodic tumbling and

heat to help reduce wrinkling. Wrinkle Shield™ option with steam

will add a short steam cycle after 60 minutes to help smooth

wrinkles.

CYCLE OPTIONS (Not all cycles and options are available on

all models.)

Use to select available modifiers for your dryer.

Remote Enable

Touch each time you want to remotely control via the Whirlpool

app. Follow the instructions in the "GET THE WHIRLPOOL

APP AND GET CONNECTED" section below for more details.

NOTE: Once Remote Enable has been selected, certain

interactions with the dryer will cause it to cancel Remote Enable.

Example: Opening the door.

CONTROL PANEL AND FEATURES

Damp Dry Signal

Touch Damp Dry Signal or touch and hold Drum Light

(depending on the model) for at least 3 seconds to turn the

Damp Dry Signal on or off. You will get a sound and display

notification as "Items are damp. You can pause and reposition

for best results".

Drum Light

Touch to turn the drum light on/off.

Steam Options

Touch to add Steam and/or Reduce Static to selected cycle.

Steam option adds steam to the end of cycle to help smooth

wrinkle. Reduce Static will automatically tumble, pause and

introduce a small amount of moisture to the load to help reduce

static.

Steam Refresh (steam models only)

This cycle is best for reducing wrinkles from dry items. Cycle

time will increase, depending on number of items. This is an

independent cycle that cannot be combined with any other

cycle.

More Time/Less Time Timed Dry Adjust

Touch More Time or Less Time with the TIMED DRY/QUICK

cycle to increase or decrease the length of the cycle time.

EcoBoost

Option

The EcoBoost

option will default on only for the REGULAR/

NORMAL cycle and is only available on that cycle. This option

allows you to increase your energy savings by using a slightly

lower heat level. The EcoBoost

times by approximately 40 minutes, which will be reflected on

the LCD Display. If optimal time is desired, touch EcoBoost

turn off this option.

Cycle Signal

Use this option to turn the signal indicating the end of a drying

cycle to Low, Medium, High, or Off.

NOTE: Press/hold Cycle Signal to select the volume.

Appearance may vary depending on model.

option will increase drying