Whirlpool Duet GGW9250PW3 Посібник з використання та догляду - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з використання та догляду для Сушарка Whirlpool Duet GGW9250PW3. Whirlpool Duet GGW9250PW3 44 сторінки. Electronic gas dryer
Друкувати сторінку
Optional exhaust installations
This dryer can be converted to exhaust out the right side, left
side, or through the bottom, Contact your local dealer to have the
dryer converted.
Fire Hazard
Cover unused exhaust
holes with one of the
following
kits:
279818 (white)
279925 (biscuit)
279969 (pewter)
Contact your local dealer.
Failure to follow
these instructions can result in death,
fire, electrical
shock, or serious injury.
A
A. Standard rear offset exhaust installation
B. Left or right side exhaust installation
C. Bottom exhaust installation (Not an option with
pedestal installations.)
Alternate
installations for close clearances
Venting systems come in many varieties. Select the type best for
your installation, Two close-clearance
installations are shown.
Refer to the manufacturer's
instructions,
/"
,;'
ii
i/
A
B
A. Over the top installation (also available
with one offset elbow)
B. Periscope installation
NOTE: The following kits for close clearance alternate
installations are available for purchase. Please see the
"Assistance
or Service" section of this manual to order.
•
Over thetop
Installation:
Part Number 4396028
•
Periscope Installation (For use with dryer vent to wall vent
mismatch):
Part Number 4396037 - 0" (0 cm) to 18" (45.72 cm) mismatch
Part Number 4396011 - 18" (45.72 cm) to 29" (73.66 cm)
mismatch
Part Number 4396014 - 29" (73.66 cm) to 50" (127 cm)
mismatch
Special
provisions for mobile home installations
The exhaust vent must be securely fastened to a noncombustible
portion of the mobile home structure and must not terminate
beneath the mobile home. Terminate the exhaust vent outside.
Determine
Vent Length
1. Select the route that will provide the straightest and most
direct path outdoors. Plan the installation to use the fewest
number of elbows and turns. When using elbows or making
turns, allow as much room as possible. Bend vent gradually
to avoid kinking. Avoid 90 ° turns when possible,
Determine vent length.
The maximum length of the exhaust system depends upon:
•
The type of vent (rigid metal or flexible metal).
•
The number of elbows used.
•
Type of hood.
Recommended
hood styles are shown here.
(10.2 cm)
(10.2 cm)
A. Louvered hood style
B. Box hood style
10