Whirlpool YWED9270XL2 Інструкція з використання та догляду - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з використання та догляду для Сушарка Whirlpool YWED9270XL2. Whirlpool YWED9270XL2 28 сторінок. Duet / duet steam electronic dryer
Друкувати сторінку
NOTE: Not all cycles are available on all models.
Select the drying cycle that matches the type of load you
are drying. See the Automatic Cycle Settings or Timed Cycle
Settings chart.
TIMED DRY
ENHANCED
TOUCH UP
Cycle Control knob
Automatic Cycles
Automatic Cycles allow you to match the cycle to the load you are
drying. See the following Automatic Cycle Settings chart. Each
cycle dries certain fabrics at the recommended temperature.
A sensor detects the moisture in the load and automatically
adjusts the drying time for optimal drying. Press the DRYNESS
button to adjust the default dryness level.
Automatic Cycle Settings
Automatic Cycles
Load Type
HEAVY DUTY
Heavyweight items, towels, jeans
ECO NORMAL
Designed for average size loads
of medium weight where
improved energy is desired
NORMAL
Jackets, pillows, corduroys, work
clothes, sheets
CASUAL
Permanent press, synthetics
DELICATE
Lingerie, blouses, washable
woolens
DAMP DRY
Clothes to come out suitable
for ironing
If loads do not seem as dry as you would like, select More Time
next time you dry a similar load.
6
Cycles
STEAM CYCLE
QUICK
REFRESH
Temperature
Est.
Cycle
Time
(Minutes)
High
40
Medium
35
Medium
35
Low
35
Extra Low
30
Low
20
Timed Cycles
Use Timed Cycles to select a specific amount of drying time
and a drying temperature. When a Timed Cycle is selected,
the Estimated Time Remaining display shows the actual time
remaining in your cycle.
Press the TEMP button to change the drying temperature from
the default setting.
Press the MORE TIME or LESS TIME button to increase or
decrease the drying time. Tap MORE TIME or LESS TIME
and the time will change by 1-minute intervals. Press and
hold MORE TIME or LESS TIME and the time will change by
5-minute intervals.
Timed Cycle Setting
Timed Cycles
Load Type
TIMED DRY
Heavyweight items,
bulky items, bedspreads,
work clothes
*Reset time to complete drying, if needed.
Steam Cycle
In these cycles, a small amount of water is sprayed into the dryer
drum after several minutes of tumbling with heat. The STEAM
Status Light will come on while the water is sprayed into the drum.
The dryer will continue to tumble at Medium heat for the duration
of the cycle. The Steam Cycles include Enhanced Touch Up and
Quick Refresh. The heat setting and cycle time are not adjustable
for the Quick Refresh Cycle, but can be adjusted for the Enhanced
Touch Up Cycle.
NOTE: Results may vary depending on fabric. 100% cotton
garments with wrinkle-free finish may yield better results than
those without.
Use of a fabric softener sheet is not recommended with steam
cycles as it may cause temporary staining on the clothes.
Steam Preset Cycle Settings
Timed Cycles
Load Type
ENHANCED TOUCH UP
Helps to smooth out
wrinkles in loads left in the
dryer for an extended
period.
QUICK REFRESH
Helps to smooth out
wrinkles and reduce odors
from loads consisting of
one to four dry items.
*The Enhanced Touch Up Cycle has a minimum dry time of
15 minutes and a maximum dry time of 40 minutes. Only the
Medium and High temperature settings can be used for the
Enhanced Touch Up Cycle.
Default
Default Cycle
Temperature
Time*
(Minutes)
High
80
Default
Est. Time*
Temperature*
(Minutes)
Medium
20
Medium
15