Clank Chaos Посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник для Обладнання для запису Clank Chaos. Clank Chaos 12 сторінок.
Також для Clank Chaos: Посібник (10 сторінок), Посібник із швидкого старту (2 сторінок)

Друкувати сторінку

Panel overview

On Chaos' first row, from left to right, there are

four inputs (clock in, loop, cv in and chaos) and

one output (clock out) [1] . In the middle row there

are six gate outputs, one for each channel. A

dedicated LED blinks every time a gate signal is

sent. Under those you have the six corresponding

CV outputs (0v-8v) [2].

There are two LED bars on the module, one with

six LEDs and the other one with ten. The first

one is the channel bar; it indicates the selected

channel in red and reflects its real time CV

intensity by changing LED luminosity. The ten LED

bar is the value bar, and it is mainly thought for

editing purposes. Press any button to show the

parameter value. By default, if nothing is pressed it

will display the current channel's CV output value.

[3]

This LED system is meant to be a minimal yet

effective way to control what is happening on all

the CVs and gates of each channel. Everything is

under your control and ready for action.

To change the selected channel, simply rotate the

encoder without pressing any other button. When

you reach the limit on the right all the LEDs will

become red, meaning you have selected all the

channels together. In this way you can easily loop

or change a modifier or configuration at the same

time for all the channels [4].

The five black buttons on the bottom left are the

modifiers. (p.8-9) [5].

The white button is used to enter the loop mode.

(p.10) [6].

Hold down a modifier to see the corresponding

value, rotate the encoder to change the value and

release the button when you are done.

The three small buttons placed under the encoder

correspond to the channel configuration [7]:

• Input assign/time swing

• Scale quantization/slewing

• Save/recall ability