Whirlpool AKR 770 Інструкція з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Вентиляційна витяжка Whirlpool AKR 770. Whirlpool AKR 770 4 сторінки. Minimum height above cooker
Також для Whirlpool AKR 770: Інструкція з монтажу (4 сторінок)

Друкувати сторінку

31833111.fm Page 6 Friday, December 19, 2003 9:57 AM

AKR 604-605-606-650

AKR 769-770-771-772-773

1. Control panel.

2. Grease filters (1 or 2 pieces).

3. Lighting unit (AKR 772-773: halogen bulbs).

4. Grease filters surround.

Removing and renewing or cleaning the

grease filter:

1. Disconnect the electrical power supply.

2. Remove the dirty grease filter by pulling the handle

first backwards and then downwards (Fig. 1).

3. After cleaning the grease filter refit in reverse

order, making sure the entire extraction surface is

covered.

Replacing bulbs

1. Disconnect the electrical power supply.

2. Remove the grease filter (Fig. 1) and the grease

filter surround (Fig. 2 - sequence a-b).

3. Remove the burnt-out bulb.

4. Use 40 W max E14 bulbs only.

For models AKR 772-773 use 20 W max halogen

bulbs (GU5.3 - Ø 50 mm).

5. Remount the grease filters surround.

Fitting or renewing the carbon filter:

1. Disconnect the electrical power supply.

2. Remove the grease filter (Fig. 1) and the grease

filter surround (Fig. 2 - sequence a-b).

3. If the carbon filters are already mounted (one or

two filters, depending on the model. covering the

motor protection grille) and need renewing, turn

the central handle (Fig. 3 - c) anticlockwise until

the filters release.

4. If the carbon filters are not already mounted,

locate the filters to cover the motor protection

grilles (two protection grilles - two carbon filters,

one protection grille - one carbon filter), then turn

the central handle (Fig. 3 - c) of the filters

clockwise.

5. Refit the grease filter surround and the grease

filter.

5019 318 33111

PRODUCT SHEET

CONTROL PANEL

Light switch.

The switch has two positions

(lights OFF - lights ON).

To switch on the lights: move the switch to the

right.

Speed selector switch.

The extraction speed switch has 3 settings,

depending on the amount of steam and fumes.

To increase the extraction speed: move the

switch to the right.

Fig. 2

Fig. 3

Fig. 1

AKR 650 - AKR 773