Whirlpool AKR3200/IX Інструкція з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вентиляційна витяжка Whirlpool AKR3200/IX. Whirlpool AKR3200/IX 14 сторінок. Decorative hood

Друкувати сторінку

4. Press 'C' / 'E' to change the speed of operation when timer

stops blinking。

5. Press "F" to set the working time. Press it for 3 seconds,

clock "

key C or E to set the working time.

6. Press 'G' to turn ON / OFF the lamp

MAINTENANCE

Switch off or unplug the appliance from the mains supply

before carrying out any maintenance work.

GREASE FILTER

* The grease filters should be cleaned frequently (every two months

of operation, or more frequently for heavy use). Use a warm

detergent solution.

* Grease filters are washable.

1. Remove the grease filter by pressing the latch on the filter (Fig5).

This will disengage the filter from the hood. Tilt the filter

downward and remove.

2. Wash the filters, taking care not to bend them. Allow them to be

dry before refitting.

3. To install the grease filter, press the latch on the filter again.

Make sure the filter is securely engaged after assembly.

WARNING:

Always switch off the electrical supply before carrying out any

operation on the appliance.

Only a qualified and trained service technician can undertake the

work of blubs replacement and servicing.

CAUTION:

1. The surface and the cover of the lamp may be hot. TAKE CARE

while replacing.

"on the digital display will flash and then press

the