Whirlpool WT9BTABC Посібник - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник для Вентиляційна витяжка Whirlpool WT9BTABC. Whirlpool WT9BTABC 19 сторінок.

 Pin ③ should face up

 Axis ④ should be inserted in holes ⑤ on the hood body

 Repeat above steps to install the other half v-flap ②

Warning: Electrical connections must be carried out by a specialized technician, this appliance

must be connected with earth wire. Supply cord must be disconnected from power

source before connection (to the appliance).

If you have an air outlet connect to the outside of your home, your cooker hood can be connected with

an extraction duct (enamel, aluminum, flexible pipe or non-flammable material with an interior diameter

of 150mm), as shown in below picture.

1. Before installation, turn off the unit and unplug it from the outlet.

2. Mark a line "A" as shown in FIG 4, the distance between the bottom of the hood to the top of

cooktop is 650-750mm.

Mounting Method