CalderaSpas CalderaSpas Utopia Series Інструкції перед доставкою - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкції перед доставкою для Спа-центр CalderaSpas CalderaSpas Utopia Series. CalderaSpas CalderaSpas Utopia Series 17 сторінок.
Також для CalderaSpas CalderaSpas Utopia Series: Інструкції перед доставкою (16 сторінок)
![CalderaSpas CalderaSpas Utopia Series Інструкції перед доставкою](/uploads/products/server2/689334/689334.jpg)
DOOR PANEL REMOVAL
The illustrations are to be used as a reference
only (your spa may look different).
1
Locate the two buttons below the
front panel on the same side as
the Main Control Panel
2
Push up and hold one of the
buttons using an Allen wrench less
than ¼" (6 mm) in width or small
screwdriver into the center of the
safety lock then pull the door panel
away from the spa next to that
button location. Repeat procedure
on second button.
3
Pull bottom away from spa, lower
slightly and remove from spa. Place
door panel in cool shaded place.
DOOR PANEL REPLACEMENT
1
Raise door panel placing top
under Stainless border with bottom
slightly away from spa.
2
Push door panel against spa allowing
it to rest above the wood frame.
Repeat on other side of door panel
Safety Lock
Button
3
Push bottom of door panel all the way in
making it even with existing panels.
If necessary, slide door panel from side
to side making the spacing even on both
sides of the door.
Main Control Panel
Safety Lock
Button
Page 9