Fireside mantels & surrounds Kenwood Flush Посібник з монтажу Посібник з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з монтажу Посібник з монтажу для Камінне приладдя Fireside mantels & surrounds Kenwood Flush. Fireside mantels & surrounds Kenwood Flush 6 сторінок.

Друкувати сторінку

Before

you start t t t t

you star

Above is a diagram of issues that may prevent an installation of wood products around a firebox:

a. Is base molding already installed?

b. Where are the electrical outlets or firebox switch?

c. Is there enough distance between windows and edge of cabinet?

d. Is the fireplace centered between walls?

e. Return air vent location?

Is the fireplace centered between windows?

g. Where are the electrical & cable outlets positioned?

h. Is there hardwood or carpet going in?

Parts List and Diagram

MANTEL PARTS:

1 Top assembly

1 Left leg assembly

1 Right leg assembly

3 Left, right, top scribe molding

1 Hearth base (optional)

8 Cams (installed)

4 Double head pins

(installed)

4 Wooden dowels (installed)

4 16D Finishing nails (not shown)

9 4D Finishing nails (not shown)

Tools and supplies needed:

- #2 Philips screwdriver

- Carpenter's level

- Tape measure, pencil

- Construction adhesive

- Shim material

- Portable drill

- 1/16" and 3/32" drill bits

- Flat head screwdriver

- Hammer

- High temp. silicon adhesive

- Stud finder

- nail set

www.fireplaces.com

The walls and floor in the area of the installation should be clean, plumb and

level. Any major deviation should be remedied before installing the fireplace,

marble or the mantel /cabinet.

(a)

(b)

(c)

(d)

(e)

(f)

(g)

(h)

6200-002

REV. A

04.16.2009