Firestone Air-rite 2581 Інструкція з монтажу Посібник з монтажу - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Автомобільні аксесуари Firestone Air-rite 2581. Firestone Air-rite 2581 17 сторінок.
Друкувати сторінку
5
INSTALL AIR LINE TUBES
EXHAUST ALL AIR FROM THE SYSTEM PRIOR
TO RELEASING AIR TUBES FROM AIR FITTINGS.
1
Route the Air Line Tube from
1/8 NPT Push-to-Connect
Straight Fitting on the top
of the Air Compressor to
the Supply (SUP) air fitting
on the ECU, leaving room
to secure it safely. Use the
guidelines on page 4 for
proper Push-to-Connect
Straight Fitting install.
2
Repeat Steps 1 to route Air
Line Tube from the ECU to
the Air Springs. Use the
AS-1 and AS-2 air fittings
on the ECU.
3
If desired, install Air Line
Tube to the Exhaust (EXH)
air fitting to reduce exhaust
noise and prevent dirt from
clogging the port (recom-
mended for off-road or
dirty environments). Do not
exceed 16" of Air Line Tube,
and secure it so the end
turns to the ground.
DO
Make sure the cut is as square as possible.
Use a tube cutter or very sharp utility knife.
PROPER AND IMPROPER CUTS IN THE AIR LINE TUBE
Square cut
AIR LINE TUBE
90˚
9
OPTIONAL: Install Air
Line Tube to the EXH
air fitting - 16" max.
AIR LINE TUBE
Route to EXH on ECU.
Route to AS-1
on ECU.
LEFT AIR SPRING
(when facing forward)
DON'T
AIR LINE TUBE
5
PSI
1/8 NPT PUSH-TO-CONNECT
STRAIGHT FITTING
AIR COMPRESSOR
ECU
EXH
EXH
AS-1
AS-1
AS-2
AS-2
SUP
SUP
AIR LINE TUBE
AIR SPRINGS
(sold separately)
Fold or kink the Air Line Tube.
Cut the Air Line Tube at an angle.
Use pliers, scissors, snips,
saws, or side cutters.
AIR LINE TUBE
Create
loop in Air
Line Tube.
* As a water/debris
trap. See page 4.
AIR LINE
TUBE
Route to SUP
on ECU.
Route to AS-2
on ECU.
RIGHT AIR SPRING
(when facing forward)
AIR LINE TUBE
riderite.com