Firestone 2491 Інструкція з монтажу Посібник з монтажу

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Системи управління Firestone 2491. Firestone 2491 6 сторінок. Light duty electronic air command

Друкувати сторінку

Light Duty Electronic Air Command

INSTALLATION INSTRUCTIONS

Congratulations on your purchase of a Light Duty Elec-

tronic Air Command™ kit. This kit was designed to

provide inflation control of your air helper springs. This

kit will be an asset to your vehicle, meeting nearly all of

your air supply needs.

Please take a few minutes to read through the

instructions to identify the components and learn how

to properly install your Light Duty Electronic Air Com-

mand™ kit.

NOTE:

The Light Duty Electronic Air Command™ kit can be

used with all air helper spring products. If you are

installing an air suspension system, do not install the

air line tubing to the air springs as stated in the sus-

pension system instruction manual. If you are add-

ing the Light Duty Electronic Air Command™ kit to

an existing air suspension system, you will need to

deflate the air springs and remove the air line tubing.

PARTS LIST

GAUGE PANEL

AIR COMPRESSOR

VALVE BLOCK

PRESSURE SENSOR

WIRE HARNESS

AIR LINE

MALE FITTING

TEE FITTING

3/16" FLAT WASHER

21-8392

PSI

BAR

NOTE ON CONNECTING AIR LINE TUBING

Cut the air line tubing as squarely as possible. To con-

nect the air line tubing to the fittings, push the tubing

into the fittings as far as possible. If for any reason the

tubing must be removed, first release the air pressure

from the air helper spring. Push the collar towards the

body of the fitting and then pull out the tubing. To reas-

semble, make sure the tubing is cut squarely and push

the tubing back into the fitting.

TOOLS REQUIRED:

CENTER PUNCH

9/32" DRILL BIT

WIRE CRIMPERS

1/2" WRENCH

7MM WRENCH

9369

1/4" FLAT WASHER

9377

1/4"-20 X 2-1/2" HEX HEAD BOLT

9357

10/32" X 3/4" MACHINE SCREW

9054

10/32" X 1" MACHINE SCREW

9371

1/4"-20 NYLOCK NUT

0938

10/32" NYLOCK NUT

3055

VELCRO TABS

3025

NYLON TIE

07-11

2491

™

3/16" DRILL BIT

3/8" DRILL

3/8" WRENCH

5/8" WRENCH

PHILLIPS SCREWDRIVER

NAD-37281-3