AER AG 83 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Спікери AER AG 83. AER AG 83 16 сторінок.

48 V phantom power at microphone input

Microphones that require 48 V phantom

power (P 48) can be connected directly to mic

in by an XLR plug.

When connected by a jack plug, the 48 V

phantom power is not applied. Use the jack

connection for microphones that must not be

connected to phantom power.

Please also read the general notes on phantom

power.

9 V phantom power at line input (optional)

The AG 8

Active Monitor may be equipped with a

9 V phantom power. It powers instrument preamps

that are prepared accordingly. Such preamps are

connected to line in by a stereo jack cable. The

phantom power activates automatically, and the

yellow indicator lamp lights up.

Sources that don't need phantom power should

always be connected by a mono jack cable. Thereby

the phantom power is kept away from the source

and cannot damage it. You should also make sure

that the plug is always fully plugged in.

At the XLR line input the 9 V phantom power is not

present.

General Note:

Use of phantom power

(Phantom power = remote supply, here: powering

an audio device via the connected audio line)

Only suitable devices should be connected to an

input with phantom power.

Such devices are also labelled accordingly; please

heed the permissible power consumption (see

technical data).

Some microphones with a balanced signal need no

phantom power, but can handle it anyway.

Other devices, which have not been designed

explicitly for phantom power operation, can suffer

from considerable malfunctions and damage may

result as well.

In case of uncertainty please consult the

manufacturer of your device.

We wish you lots of fun playing your AG 8