Clarion CZ103A Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільний приймач Clarion CZ103A. Clarion CZ103A 14 сторінок. Cd/usb/mp3/wma player
Друкувати сторінку
USB Operations
1. Open the cover of the USB connector to
the right. Insert a USB cable (CCA-755)
into the USB connector. Insert a USB
device into the USB cable.
When connecting a USB device, the unit
will read the files automatically.
2. To remove the USB device, you should
first select another source or turn off
the power, in order to avoid damaging
the USB device. Then take off the USB
device. Open the cover to the left.
3. O p e r a t i o n i s s a m e a s M P 3 / W M A
operation.
AUX Operations
Press [SRC /
] button to select "AUX".
AUX is just for audio content with 3.5mm Jack
connector plugged into audio-in socket on the
front panel.
AUX input sensitivity setting
1. Press and hold the [DISP] button (1 sec.).
2. Turn the [VOLUME] knob to select "AUX
SENS".
3. If the output level of connected external audio
player is "HIGH", rotate [VOLUME] knob
and choose "LOW". And if the output level is
"LOW", choose "HIGH".
CZ103A
8
6. TROUBLE SHOOTING
GENERAL
Problem
Unit can not power on.
Unit can not power on.
CCA-755
Nothing happens
when buttons are
pressed.
Display is not
accurate.
No/low audio output.
Poor sound quality or
distortion.
Unit resets itself when
engine is off.
DISC Player
Problem
Disc cannot be
loaded.
Sound skips or is
noisy.
Sound is bad when
power is first turned
on.
Cause
Unit fuse blown.
Replace with new fuse of correct rating.
Car battery fuse blown.
Replace with new fuse of correct rating.
Turn off the power and remove the DCP.
Press the [RESET] button with a thin rod.
Note:
The microprocessor has
When the [RESET] button is pressed, turn off
malfunctioned due to noise, etc.
the ACC power.*
* When the [RESET] button is pressed,
frequencies of radio stations, titles, etc.
stored in memory are cleared.
Improper audio output connection. Check wiring and correct.
Volume set too low.
Increase volume level.
Speakers damaged.
Replace speakers.
Heavily biased volume balance.
Adjust the channel balance to center position.
Speaker wiring is in contact with
Insulate all speaker wiring connections.
metal part of car.
Non-standard disc used.
Use a standard disc.
Speaker power rating does not
Replace speakers.
match unit.
Wrong connections.
Check wiring and correct.
Speaker is shorted.
Check wiring and correct.
Incorrect connection between ACC
Check wiring and correct.
and Battery.
Cause
Another disc is already loaded.
Eject the disc before loading the new one.
There is an object install installed
Remove the object inside the unit.
the unit.
Compact disc is dirty.
Clean the compact disc with a soft cloth.
Compact disc is heavily scratched
Replace with a compact disc with no
or warped.
scratches.
Condensation may form on the internal
lens when the car is parked in a
Let dry for about 1 hour with power on.
humid place.
Measure
Measure