Alcohol Countermeasure Systems DRIVESAFE Інструкція з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Випробувальне обладнання Alcohol Countermeasure Systems DRIVESAFE. Alcohol Countermeasure Systems DRIVESAFE 16 сторінок. Breath alcohol tester
Друкувати сторінку
TESTING IN NORMAL CONDITIONS
NOTE: To achieve accurate results, insert a new
mouthpiece each time the DRIVESAFE tester is used.
Power on the tester and wait for READY to appear.
1.
2.
Blow steadily and continuously into the mouthpiece for
5 seconds.
A continuous tone will sound to indicate proper breath
flow.
If the breath sample is intermittent, too hard or too soft,
several beeps will sound and ABORT will appear on the
display. Wait for READY to appear and try the test again.
3.
Stop blowing when the tone ends and a click is heard to
indicate that the breath sample is complete.
The DRIVESAFE tester will analyze the sample and
display the BrAC result within a few seconds.
CAUTION! Be aware that alcohol is present in many
products such as breath spray, mouthwash and
medicine, as well as in certain foods and beverages,
which may distort the BrAC results.
Before testing: Wait 20 minutes after eating or drinking
and 3 minutes after smoking.
5
DRIVESAFE