AlcoLimit DEFENDER Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Випробувальне обладнання AlcoLimit DEFENDER. AlcoLimit DEFENDER 12 сторінок.

First, place 2xAAA batteries (supplied) into your ALCOLIMIT DEFENDER.

Slide the rear tab across to release the

battery compartment cover and slide it

downwards to remove.

1. To turn your ALCOLIMIT DEFENDER on, depress the ON/OFF button for 2 seconds until

the screen turns on.

2. The unit will commence a warm-up process.

Purge cycles and circuit tests are taking place during this time. This process generally takes 30

seconds but can last 2 minutes.

3. The unit is ready when two beeps sound and the word

If you don't blow into the breathalyser within 20 seconds it will turn off.

4. Attach the mouthpiece tube and blow one consistent deep breath into the

sensor. There will be a beeping noise while you are blowing.

A full lung of air is required. Once your ALCOLIMIT DEFENDER has received enough air-

flow you will hear a double click signalling you to stop.

If inadequate airflow is received, the word

hole on the opposite side of the mouthpiece while testing as this will affect the airflow.

5. A circling line will appear on the display while the breathalyser is analysing your breath

sample. Your %BAC result will then be displayed on the screen.

The display shows only 3 digits to the right of the decimal place.

For example '050' indicates '0.050%BAC

AlcoLimit

USAGE

Ensure the batteries are inserted in

the correct direction.

bLo

FLo

will appear on the screen. Do not block the air

DEFEN DER

will appear on the display.

-5