AlcoLimit RBT Mini Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Випробувальне обладнання AlcoLimit RBT Mini. AlcoLimit RBT Mini 15 сторінок.

STEP 7. Press the Cog/Settings symbol in the bottom right.

Select your "Limit Line. "

In 'Stand alone' mode this is the level at which the red light will illuminate

to show you are over your designated level. Below this level the green

light will illuminate.

TURN ON Sound and TURN ON Camera, if you would like the app to take

your photo while testing.

PERFORMING A BREATH ALCOHOL TEST

STEP 1.

Ensure you have waited 20 minutes since your last alcoholic drink.

Insert a new mouthpiece into your AlcoLimit RBT Mini Breathalyser and press the

power button ON.

STEP 2.

Open the Alcofind app and press 'START TEST' .

Select the User. You can have 2 user's data saved separately. Historical data can be

viewed by pressing on the graph icon at the bottom of the screen.

STEP 3.

The AlcoLimit RBT Mini will warm up to a count of 100. At 95 take a deep breath

and prepare to test.

START BLOWING will appear on the screen when it is ready.

STEP 4.

Blow into your AlcoLimit RBT Mini Breathalyser with a strong consistent breath. It

will take about five seconds. You should hear/feel the fuel sensor pump click,

indicating it has received enough air-flow. 'ANALYZING' will appear on the display.

STEP 5.

Once your AlcoLimit RBT Mini Mobile Breathalyser has analysed the sample, it will

send the reading to your mobile device and your %BAC reading will appear on

the display (along with your photo if the camera is set to ON).

If an insufficient breath sample is taken an error message will appear on the

screen. Press OK to retest. The result will be marked as a 'D' in the results graph.

The %BAC result will remain on the screen for 15 seconds before you can proceed.

AlcoLimit

RBT

Mini ®

-6