AlcoLimit VIVID ALCO-076 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Випробувальне обладнання AlcoLimit VIVID ALCO-076. AlcoLimit VIVID ALCO-076 12 сторінок. Digital breathalyser

Друкувати сторінку

To retest, if your AlcoLimit VIVID has turned itself off , depress the ON/OFF button, and wait for it to

warm up again.

When high alcohol readings are received, retesting should be spaced 3 minutes apart to

allow all alcohol vapour to be eliminated from the sensor.

This mode simply detects the presence or absence of alcohol.

Turn the unit on, blow gently through the mouthpiece and depress the ON/OFF button while blow-

ing.

The result will be displayed as either 'P' when alcohol is not detected or 'F' when alcohol is detected.

Press and hold the ON/OFF button at start-up and 'C' and 'A' will appear on the display followed by

numbers. 'C' = number of tests since the last calibration. A = number of tests that have detected

alcohol since the last calibration.

Your %BAC will be displayed on the screen for 20 seconds after which your ALCOLIMIT VIVID will

turn itself off .

Breath Alcohol

Concentration (BAC)

0.000-0.049%

0.050 - 0.200%

0.200 upwards

This device is a 0.05% BAC device (0.05%BAC is equal to 0.05grams of alcohol per 100ml of blood).

Australian & New Zealand Customers: The drink driving cut-off for people on a full licence is 50mg

per 100ml of blood. This equates to 0.05%BAC.

This is current as at April 2015. The Australian & NZ Govts. may change this level in the future so

please check before driving.

RETESTING

FAST MODE

USAGE COUNTER

DISPLAY & INTERPRETATION

Digital Display and Audio Signals

%BAC displayed on screen with audible beep

%BAC displayed on screen with one long audible beep

'OL' will appear on the screen indicating the maximum level

has been reached

VIVID

AlcoLimit

-6