Alcolizer Druglizer LE5 Посібник користувача - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник користувача для Випробувальне обладнання Alcolizer Druglizer LE5. Alcolizer Druglizer LE5 20 сторінок. Charging cradle
Також для Alcolizer Druglizer LE5: Посібник користувача (16 сторінок), Посібник користувача (19 сторінок), Інструкція з монтажу (3 сторінок)
Друкувати сторінку
When the BrAC reading is calculated, it will be displayed on the screen together with the
unit of measurement (e.g. g/210L BrAC, g/100ml BAC) and be retained until the recovering
period has ended. The screen colour will vary depending on the percentage of alcohol
present; green for zero to 0.019 g/210L BrAC, yellow for 0.020 g/210L BrAC to 0.049 g/210L
BrAC and red for readings greater than 0.050 g/210L BrAC. The Recovering period is
indicated by 'Recovering' shown on the display (Refer Figure 12).
Refer to Section 9 for instructions on how to change the Setpoint values.
•
The Recovering period is the time the fuel cell sensor requires to recover from the previous breath
test. This period will vary according to BrAC readings displayed, longer for higher readings.
•
Remove the used mouthpiece by rotating it and it will come away from the spigot easily. Dispose of
the mouthpieces in a responsible manner.
•
To perform another breath test, repeat steps from section 3.5.1 and 3.5.2. Results will display on the
screen for 10 seconds. A user is able to override this function by pressing key to continue as displayed
on the screen.
•
Overrange result is if a result above 0.462g/210L is obtained the below screen will appear (Figure
12b)
REF: Alcolizer LE5 Alcohol Tester User Manual V15 docx
Figure 11- Analysing Sample Message
Figure 12- Various BrAC and Screen Colour Displayed
Figure 12b- Overrange screen display
Page 14
© Alcolizer Technology