ALcom AT6128 Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Бездротовий телефон ALcom AT6128. ALcom AT6128 14 сторінок.

transfer calls from that different model phone to the model referred in this manual

and intercom during may not be possible in certain cases.

If the paging number is set, Anti-steal dialing function will not work.

This feature will work only on regular PSTN networks.

Any special services starting with " * " offered by your Telephone company may not

function properly. Please deactivate Call Transfer function before using those special

services.

( Example Phone banking service which prompts you to press " * " followed by some number for

choosing language etc.)

ANTI-STEAL DIALLING FUNCTION

1. In on-hook state, press and hold #/= key for 3 seconds, LCD displays SPI ON

2. Press

key twice and then

3. Press and hold #/= key for 3 seconds again, LCD displays SPI OFF

When the anti-steal dialing is set to ON, users who want to dial using an extension via the same

line will hear a "DI-DI, DI-DI" beep continuously and will not be allowed to make a call.

NOTE: If page number is set this function will not work.

SETTING RINGING TONE AND ADJUST RINGING VOLUME

There are 16 kinds of ringing tone and ringing OFF for selection:

1. In on-hook state, press HD/RING key once, LCD displays ring 02 db8

2. Press HD/RING key continually to select the desired ringing or set ringing OFF.

3. Press UP/+ or DOWN/- key to set ringing volume.

4. Press SET to confirm and exit.

NOTE: The volume ranges from 1db-8db, with 8db being the loudest. Ring OFF is "Do Not

Disturb" mode. If the phone is set to this mode, the telephone will not ring when there is an

incoming call.

DO NOT DISTURB AT REAL TIME

When a call comes and the telephone is ringing, press DEL key, it stops ringing.

ADJUST HANDSFREE VOLUME

In handsfree mode, press UP/+ or DOWN/- to adjust the handsfree volume, LCD displays the

volume level and there are a total of 4 levels.

MUTE FUNCTION

When making a phone call, if you need a temporary talk with someone else and you don't want

the phone receiver hear you're speaking, press MUTE key to mute your voice sending, and LCD