Direct Air RG52A3/BGCEF Інструкція з монтажу Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Пульт дистанційного керування Direct Air RG52A3/BGCEF. Direct Air RG52A3/BGCEF 8 сторінок. Air conditioner remote controller
Друкувати сторінку
Indicators on LCD
Mode display
Displays the current operation mode. Including
auto(
applicable to cooling & heating models only ),
fan(
Transmission Indicator
This transmission indicator lights when remote
controller transmits signals to the indoor unit.
ON/OFF display
Displayed by pressing the ON/OFF button.
Press the ON/OFF button again to remove.
TIMER ON display
Displayed when TIMER ON time is set.
TIMER OFF display
Displayed when TIMER OFF time is set.
Sleep Display
Displayed under sleeping operation.
Press the SLEEP button again to remove.
FOLLOW ME Display(on some models)
Displayed when FOLLOW ME function is activated.
Temp./Timer display
Displays the temperature setting(17C ~30C ). When
you set the operating mode to FAN, no temperature
setting is displayed. And if in the TIMER mode, shows
the ON and OFF settings of the TIMER.
Fan speed display
Displays the selected fan speed, AUTO(no display)
and three fan speed levels "
(MED) "
The fan speed is AUTO when the operating mode is
either AUTO or DRY.
Note:
All indicators shown in the figure are for the purpose
of clear presentation. But during the actual operation
only the relative functional signs are shown on the
display window.
), cool(
), dry(
), heat(
) (be
) and back to auto(
).
O
O
" (LOW) "
" (HIGH) can be indicated.
7 7
3
ON/OFF
SHORT
CUT
1
MODE
TIMER ON
TEMP
FAN
TIMER OFF
SLEEP
TURBO SELF CLEAN
LED FOLLOW ME
4
ON/OFF
"
SHORT
CUT
1
MODE
TIMER ON
TEMP
FAN
TIMER OFF
3
SLEEP
TURBO SELF CLEAN
LED FOLLOW ME
How to use the buttons
Auto operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
O
be set within a range of 17 C~ 30 C in 1 C
increments.
2
3. Press the ON/OFFbutton to start the air
conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, and Heating
by sensing the difference between the actual
ambient room temperature and the setting
temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is
available.
1. Press the MODE button to select COOL,
HEAT(cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature.
The temperature can
O
2
be set within a range of 17 C~ 30 C in 1 C
increments.
3. Press the FAN button to select the fan speed
in four steps- Auto, Low, Med,or High.
4. Press the ON/OFF button to start the air
conditioner.
NOTE
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
8 8
O
O
O
O