Direct Bikes DB50QT-16 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Скутер Direct Bikes DB50QT-16. Direct Bikes DB50QT-16 16 сторінок.

The battery supplied is a SEALED lead acid type.

Please wear protective clothing at all times when

assembling the battery. If spilled rinse the area

Place battery on level ground out side. Using blister

pack of acid supplied, turn upside down and put

onto the top of the battery. The six foil seals should

locate accordingly with the 6 cells of the battery.

Push the blister pack down so that the seals are

broken. Leave the acid to drain into the battery.

Once all of the acid has drained into the battery,

remove the blister pack and discard appropriately.

Remember there may still be small amounts of acid

inside it. Let the battery stand for 20 minutes. Make

sure that the acid is covering the plates. If needed

top up with distilled water. Place the sealing cap

onto the battery and push down evenly till the cap is

flush. Now wash any spillages off the battery.

The battery should be charged at 1/10 of its

capacity for 10 hours. For example if it is a 12 volt 7

amp hour (12v7ah) battery it should be charged at

0.7 amps for 10 hours. Do not use a car charger as

they often have 4 to 10 amps output and will

damage the battery. No naked flames. No smoking.

Charge in a well ventilated area.

Filling the battery

immediately with water.

Charging of the Battery