Clarion ARX4570 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільна стереосистема Clarion ARX4570. Clarion ARX4570 15 сторінок. Am/fm cassette with cd/md changer control
Також для Clarion ARX4570: Посібник з монтажу/підключення проводів (4 сторінок)

Друкувати сторінку

Tape Operation

Loading Tapes

Insert the cassette tape into the Cassette inser-

tion slot with the side on which the tape is

exposed facing the right. Playback starts auto-

matically.

The metal tape setting is set automatically when a

metal or chrome tape is loaded.

When the end of the cassette tape is reached, the

auto reverse mechanism is activated and the other

side of the tape begins playing automatically.

Listening to a tape which is already loaded

Press the FNC button

mode. Playback begins automatically.

It is possible to listen to the radio during fast-forward,

rewind or search operations.

Once the operation is complete, tape playback

resumes (Monitor).

Stopping Playback Temporarily

Press the Play/Pause button

ton again to resume playback.

Ejecting Cassette Tapes

Press the Eject button

ejected.

The radio mode is set automatically 4 seconds after

the eject button is pressed.

Fast-Forwarding and Rewinding

Use the Left and Right buttons

: Press this to fast-forward the tape.

: Press this to rewind the tape.

APC (Auto Program Control)

Press the Left or Right button

: Press this twice to move ahead to the

beginning of the next selection.

: Press this twice to move back to the

beginning of the current selection.

to select the tape

. Press the but-

. The cassette tape is

twice.

Switching to the Other Side of the

Tape

Press the PROG button

switched to the other side of the cassette tape.

FF Scan Function (Intro Music Scan)

When the SCN button

appears on the display, and the first 10 seconds

of all the tracks on the cassette tape are played.

Press the SCN button again to stop scanning.

Repeat Function (Repeat Play)

When the RPT button

appears on the display and the current track is

played repeatedly. Press the RPT button again

to cancel the repeat mode.

Blank Skip Function

Use this function to automatically skip to the

beginning of the next recorded section when

there is a blank section of 12 seconds or more

on the tape.

When the BLS button

skip mode is set and "BLS" appears on the dis-

play. Press the BLS button

the blank skip mode.

Notes:

The APC, scan, repeat and blank skip functions will not

work with the following types of tapes:

•

Tapes on which the recording level is low

•

Tapes on which there is less than 4 seconds of blank

space between selections

•

Tapes on which there are long pauses in the middle

of selections

•

Tapes on which there is much noise between selec-

tions

. Playback is

is pressed, "SCN"

is pressed, "RPT"

is pressed, the blank

again to cancel