ErgoAV ERDHM2-01B Інструкція з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Кріплення для телевізора ErgoAV ERDHM2-01B. ErgoAV ERDHM2-01B 20 сторінок. Dual monitor desk mount

Друкувати сторінку

Bolt length: Verify adequate thread engagement with bolts or bolts / spacers combination.

We recommend thread engagement of at least 5 turns.

-Too short will NOT hold the monitor.

-Too long will damage the monitor.

Too Short

Option A (For Flat Back Monitor)

4A-1 Thread two Bolts [F1] with Washers [E1] into the top holes until about 0.1–0.2"

(3–5mm) of space is left between monitor back and washer.

4A-2 Hang the monitor from the monitor plate with the top two Bolts [F1] (see Fig. A or

Fig. B). Screw the remaining two Bolts [F1] into the bottom holes (see Fig.C).

Tighten all Bolts [F1] evenly.

For Monitor Hole Pattern:

100 x 100mm (3.9 x 3.9")

Fig. A

For Monitor Hole Pattern:

75 x 75mm (3 x 3")

Fig. B

Too Long

F1 E1

Turn clockwise to thread

Fig. C

Correct

0.1–0.2" (3–5mm)

spacing left

Correct