ErgoAV ERMCM1-01B Інструкція з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Кріплення для телевізора ErgoAV ERMCM1-01B. ErgoAV ERMCM1-01B 20 сторінок. Ceiling tv mount

Друкувати сторінку

3B-1

3B-2

3B-3

3B-4

Ceiling Thickness

≥5 1/2" (140mm)

Position the Ceiling Plate [02]

at your desired position, and

mark the pilot hole locations.

Electric Drill

(NOT Included)

Drill the 4 pilot holes using a

3/8" (10mm) diameter drill bit.

Make sure the depth of each

hole is at least 3" (75mm) deep.

Use the Hammer to knock

Anchors [A2] into the ceiling. Be

sure the Anchors [A2] are seated

ﬂush with the concrete surface.

CAUTION: DO NOT use a drill to

tighten the Lag Screws. Only use

a Socket Wrench.

Install the Ceiling Plate [02] using

Lag Screws [A1]. Tighten the Lag

Screws [A1] only until they are

pulled ﬁrmly against the Ceiling

Plate.

Pencil

(NOT Included)

3" (75mm)

3/8" (10mm)

Hammer

(NOT Included)

1/2" (13mm)

Socket Wrench

(NOT Included)