Alcoscan AL3100 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Випробувальне обладнання Alcoscan AL3100. Alcoscan AL3100 6 сторінок.

Operating Instructions

Make sure the AL3100 is plugged into a power source using a cable from

the power port.

If you are also using a printer, make sure the printer is attached the

AL3100 using BOTH the power cable to draw power from the AL3100 as

well as the serial cable to provide an operating interface to allow the

printer to access results.

Press the Power Button to turn the device on.

You will see a countdown in the display. The sensor is warming up to the

proper temperature.

At the end of the countdown, the Ready Indicator will light up. The

device is ready to accept a breath sample.

Attach a mouthpiece to the mouthpiece adapter covering the mouthpiece

slot.

As the user begins to blow into the device, an audible countdown will start

from "3" and end at "0". Important: The user must continue to blow

until this countdown is complete.

The device will analyze the breath sample for a few seconds.

After analysis, the result will be shown in the display for ~10 seconds in

the form of a %BAC reading. An accompanying LED indicator will also

light up showing whether the reading is in high, moderate or low ranges.

10.

If the optional printer is attached, the result will also be printed showing

date, time, %BAC reading and name field (the name must be written by

hand directly onto the printout).