Direct Healthcare Group Gate EASY SoftBack Технічний посібник - Сторінка 14
Переглянути онлайн або завантажити pdf Технічний посібник для Інвалідний візок Direct Healthcare Group Gate EASY SoftBack. Direct Healthcare Group Gate EASY SoftBack 20 сторінок.
Друкувати сторінку
Control box (A):
1. Connection connector # 1 / Spindle cable
2. Actuators up / down - left
3. Actuators up / down - right
4. Actuators tilt
7. Connected to spindle cable # 7
13. Information on EMC
The Easy hygiene chair has been tested to work in Hospitals and Home Health Care environments.
The main function of the hygiene chair is to be able to operate upwards / downwards, backwards / forwards
as well as charging the battery. Testing has shown that as long as the chair is subject to interference within the
limits of this standard, no loss of main functions can be detected. Disturbances that are more powerful than
these tests show, can affect the functions of the hygiene chair in such a way that they are manoeuvrable.
The hygiene chair consists of the following cables:
•
AC cable for charger, 3 conductors, 2.0 m
•
DC cable between charger and remote control, 2 split, 1.0m
•
Signal - cable between control box and remote control, 2.5m
WARNING: Always replace the Hygiene Chair's electrical components or cabling with original parts
from supplier. Failure to do so may affect the product's EMC approval.
Avoid placing / using the chair less than 0.35m from other medical equipment and / or mobile phones (or other
transmitting equipment). This is because there is then a risk that the main functions of the product will not work
as intended or that our product may interfere with other medical equipment.
14. Further information on EMC, advanced
The EASY hygiene chair ("product") is intended for use in the electromagnetic environment specified
below. The customer or the user of the product should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/ flicker
emissions
IEC 61000-3-3
14
EASY SO FTB ACK
Spindle cable (B):
1. Connects to input # 1 on control box
5. Remote control
6. Battery
7. Connects to outgoing connector on control box
Compliance
Group 1
Class B
Class A
Complies
G ATE RD .SE
Electromagnetic environment - guidance
The product uses RF energy only for
its internal function. Therefore, its RF
emissions are very low and are not likely
to cause any interference in nearby
electronic equipment.
The product is suitable for use in all
establishments including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.