AlcoSense PRODIGY Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Випробувальне обладнання AlcoSense PRODIGY. AlcoSense PRODIGY 18 сторінок.

SPECIFIC TEST WITh INPUT

Attach a mouthpiece to the sample port and select the

icon. Using the stylus pen, input information

Note: 16 characters maximum for each input.

Use

to move to the next or previous field.

If "Keyboard" is not activated, the unit will move directly to test

mode

. (See page 9 on how to enable/disable keyboard).

When the screen displays "Please Blow", take a deep breath

and blow into the mouthpiece with a slow and steady breath.

Blow until the progress bar reaches 0%. A click will be heard

indicating a sample has been taken.

The test result will display

Select

to start another test.

If the subject does not blow into the unit within 30 seconds,

the operator can either select "Refuse" to confirm the subject

refused to do the test; or can select "Test Again" to allow the

subject to redo the test.

If the subject cannot blow sufficiently to take the test, while the

subject is blowing, press the 'Passive' button to manually take

a breath sample.

(See page 6).

ATTAChINg A MOUThPIECE

• Tear the perforated section from the wrapper of a new

mouthpiece.

• Pull back the wrapper to expose half the mouthpiece.

• Ensuring the two small holes in the bottom of the mouthpiece

are aligned with the sensor, insert the notched end of the

mouthpiece into the slot on the right of the screen.

• Lower the other end of the mouthpiece until it snaps into

place.

• Discard remaining wrapper from mouthpiece.