AerAtron E503 Посібник користувача та технічні характеристики - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача та технічні характеристики для Вентилятор AerAtron E503. AerAtron E503 20 сторінок.

AerAtron >> Silent Efficiency

Ensure ceiling joists are sound and of adequate size and strength to support a 35Kg (77lb) load.

To reduce the risk of fire, electrical shock or personal injury, ensure that the fan mounting

bracket is supported directly from the building structure. DO NOT mount to an outlet box.

The mounting bracket must be firmly screwed to a load bearing structure e.g. a concrete ceiling, steel

structure or timber frame. If a timber frame is to be added it must be securely nailed or screwed

between two beams.

Mechanical issues

Do not remove the fan from the ceiling after installation.

Do not attach the Fan Assembly before the Fan Motor Housing is installed and secured. To protect the

finish, the Fan Motor Housing should be kept in the carton until ready to be installed.

After the fan is completely installed, check to make sure that all connections are secure to prevent the

fan from falling and/or causing damage or injury.

To reduce the risk of personal injury, do not bend or damage the motor Drive Shaft or Fan Assembly

when handling or installing

Aeratron fans are equipped with a self‐balancing system and do not require manual balancing!

Electrical issues

! Means for disconnection must be incorporated in the fixed wiring in accordance with national wiring

rules!

The fan can be used in conjunction with some home automation systems. For further information

please contact Aeratron Pty Ltd.

To avoid possible electric shock during installation, be sure electricity is turned off at the main power

box before commencing work. Disconnect power by removing fuse or turning off circuit breaker

before installing the fan. Ensure all spliced connections are adequately insulated.

Note:

Nothing in this manual is intended to instruct or assist untrained or unqualified persons to install this

product. Additionally, it is the responsibility of the installer and user to apply common sense and care

at all times.

IF THERE ARE ANY PROBLEMS DURING INSTALLATION OF THE FAN, THE INSTALLER MUST CONTACT THE AERATRON

HELP LINE BEFORE LEAVING THE SITE: SWISS PRECISION +61 410 465 228

Installation - Operation – Maintenance - Warranty