AerAtron FR3-42 Посібник користувача та інструкція з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача та інструкція з монтажу для Вентилятор AerAtron FR3-42. AerAtron FR3-42 18 сторінок.

Important information

1. Please read these instructions carefully, be mindful of all warnings and safety information

shown throughout this manual. Should you have any questions please call your local agent.

2. Please review the accompanying assembly diagrams before attempting installation.

3. This fan MUST be installed by a licensed & qualified electrician according to local authority

regulations and in accordance with current wiring rules of the country/state.

4. A copy of the purchasing receipt and proof of installation by a licensed and qualified electrician

according to local authority regulations is required for all warranty claims.

5. Where special access equipment is required to service the fan in accordance with local

authority regulations all associated costs are the responsibility of the owner.

6. Should a warranty claim be required, we reserve the right to charge a service fee for all call

outs where the fan is found not to be defective and / or where access is not provided.

7. To enable future programming, maintenance, cleaning and troubleshooting an isolation switch

per fan is highly recommended. Without an isolation switch per fan, an electrician maybe

required to assist with programming, maintenance, cleaning and troubleshooting. All

associated costs are the responsibility of the owner.

8. A Maximum of 8 fans on each RCD / circuit is recommended. The fans are a Class 5 Device

with leakage to Earth.

9. Your warranty will be void if a solid state dimmer or any other brand of wall controller is used.

10. The means for mains power disconnection must be incorporated in the fixed wiring in

accordance with national wiring rules.

11. To avoid possible electric shock during installation, be sure electricity is turned off at the main

power box before commencing work. Disconnect power by removing fuse or turning off circuit

breaker before installing the fan. Ensure all spliced connections are adequately insulated.

12. Warning! Do not allow the rotating fan blades to come into contact with any object, this can

cause serious injury or death.

13. Damage caused by incorrect installation, Force-majeure, lightning, electrical surges & spikes,

exposure to water, pests or moisture is not covered under warranty.

14.

This appliance is not intended for use by persons (including children) with reduced physical,

their safety.

Australia, New Zealand: In accordance with AS/NZS60355-1 & ASNZS60355-2-80: "This

appliance is not intended for use by persons (including children) with reduced physical, sensory

safety. Children should be supervised to ensure that they do not play with the appliance."

- Please read before attempting installation

This fan must be installed by a licensed and qualiﬁed

electrician according to local authority regulations.