Caleffi solar iSolar WMZ Посібник - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник для Вимірювальні прилади Caleffi solar iSolar WMZ. Caleffi solar iSolar WMZ 16 сторінок.
Друкувати сторінкуCommissioning:
Flow unit
Energy unit
Antifr. type
Commissioning:
Energy unit
Antifr. type
Antifreeze
Commissioning:
Energy unit
Antifr. type
Antifreeze
Commissioning:
Antifr. type
Antifreeze
Volume/Imp.
Commissioning:
Antifr. type
Antifreeze
Volume/Imp.
Commissioning:
Antifreeze
Volume/Imp.
Save
| 8
Flow unit
Selection: Litres/hour, Gal./minute
Litres/hour
Factory setting: Litres/hour
kWh
Î Adjust the desired flow rate unit.
Water
Energy unit
Selection: kWh, BTU
kWh
Factory setting: kWh
Water
Î Adjust the desired energy unit.
40 %
antifr. type
Selection: Water, Propylene, Ethylene, Tyfo LS
kWh
Factory setting: Water
Water
Î Adjust the heat transfer fluid used in the system.
40 %
antifreeze
Adjustment range: 20 ... 70 %
Propylene
Factory setting: 40 %
40 %
Available only if Antifr. type is set to Propylene or Ethylene.
1.0 L/I
Î Adjust the antifreeze ratio of the heat transfer fluid
Volume/Imp.
Adjustment range: 0.1 ... 99.9 L/I
Propylene
Factory setting: 1.0 L/I
40 %
Î Adjust the impulse rate of the flowmeter or flow rate
1.0 L/I
Completing the commissioning menu:
When the last menu item of the commissioning menu (Save)
40 %
has been selected, a security inquiry appears. If the inquiry
1.0 L/I
is confirmed, the adjustments will be saved. All adjustments
made during commissioning can, if necessary, be changed
later on in the corresponding menus.
used in the system.
sensor respectively.