Caleffi solar iSolar DL3 Посібник - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник для Терморегулятор Caleffi solar iSolar DL3. Caleffi solar iSolar DL3 16 сторінок.

4.1

Wall mounting

The unit must only be located in dry interior rooms.

It is not suitable for installation in hazardous locations

and should be protected against electromagnetic

fields.

Please pay attention to separate routing of sensor ca-

bles and mains cables.

Î Choose a mounting location.

Î Unscrew the crosshead screw from the cover

and remove the cover.

Î Mark the upper fastening point on the wall. Drill

and fasten the enclosed wall plug and screw leav-

ing the head protruding.

Î Hang the housing from the upper fastening point

and mark the lower fastening points (centres

180 mm)

Î Drill 2 holes (Ø 6 mm) and insert the wall plugs.

Î Fasten the housing to the wall with the lower fas-

tening screw and tighten.

Î Carry out the electrical connection according to

the terminal allocation.

Î Reattach the cover and fasten it using the cross-

head screws included.

Crosshead

screw

Cable conduits with

strain relief

In order to run cables through

the cable glands, break off the

corresponding flaps!

Cover

Lower fastening

Upper fastening

180

208