Xerox 650 Огляд - Сторінка 8
Переглянути онлайн або завантажити pdf Огляд для Принтер Xerox 650. Xerox 650 8 сторінок. Continuous feed printer
Specifications for the Xerox
Print Engine
Xerographic print engine with light emitting
diode technology
Two engines required for duplex operation
Fine particle toner delivers consistently high image
quality and fidelity
Flash-fusing technology has no contact with the media
and therefore maintains best media characteristics
(moisture and flatness)
ImageSmooth Technology™ delivers 256 grey levels at
maximum speed for smooth, high-quality halftones
Supports pinfed and pinless media types
Internal Stacker is standard in every print engine
Touch-screen graphical user interface provides
single-point operator control for print line
Auto-alignment for duplex configurations reduces
wasted media and increases operator productivity
Print Speed
300' per minute (91.44 meters per minute) switchable
to 226' and 194' per minute
654 ipm 2-up simplex US letter or 1,308 ipm 2-up
duplex US letter
616 ipm 2-up simplex A4 or 1,232 ipm 2-up duplex A4
1,200 ipm 3-up simplex 6" x 9" or 2,400 ipm 3-up
duplex 6" x 9"
1,309 ipm 3-up simplex A5 or 2,618 ipm 3-up duplex A5
Print Resolution
Input:
240 x 240 dpi, 300 x 300 dpi, 600 x 600 dpi,
1,200 x 600 dpi available at 194' per minute
Output:
240 x 240 dpi, 600 x 600 dpi, 1,200 x 600 dpi
Image Area
Printable area
The maximum printable width is:
Pinfed:
18.5" (469.9 mm)
Pinless:
19.5" (495.3 mm) guaranteed up to 19.4"
The optimal print length for box-fed media is within
8.5 mm (1/3") of page-length perforation.
Duty Cycle
Maximum Duty Cycle:
8 million feet per month
(2.4 million meters per month) or 32 million images
(2-up duplex US letter) or 30.8 million images
(2-up duplex A4)
Paper Weights
16–43 lb bond (60–160 gsm) pinfed
15–54 lb bond (40–200 gsm) pinless
For more information on the Xerox 650/1300 Continuous Feed Printer,
call 1-800-ASK-XEROX or visit us at www.xerox.com
©2010 Xerox Corporation. All Rights Reserved. XEROX® and XEROX and design®, FreeFlow®, FreeFlow Makeready®, Print Line
Management™, Print Line Bus™, VIPP®, ImageSmooth Technology™ and 650/1300™ are trademarks of Xerox Corporation in the
United States and/or other countries. 03/10 F65BR-01UA
610P729520C
650/1300™ Continuous Feed Printer
®
Options
Pinless Lightweight Media Enablement for customers
that want to run lightweight media, in some cases as
light as 40 gsm*
Pinless Heavyweight Media Enablement for customers
that want to run media as heavy as 200 gsm*
* Light and Heavyweight media requires media and
application testing
Paper Sizes
Pinfed:
• Width: 6.5" (165.1 mm)–19.5" (495.3 mm)
• Length: 3"–28" (76.2 mm–711.2 mm)
• Optional Long Signature Kit to support signature
lengths up to 60"
Internal stacker is only accessible with box-fed, fanfold
pinfed media in simplex configuration
Pinless:
• Width: 8" (203.2 mm)–19.5" (495.3 mm)
• Length: 3"–28" (76.2 mm–711.2 mm)
• Optional Long Signature Kit to support signature
lengths up to 60"
Internal Stacker not accessible with pinless paper stock
Controller
Hardware:
Dual, multi-core processors running at
1.8 GHz or better
Software:
Windows XPe
based
TM
Connectivity:
• Up to 2 host connections per engine
– TCPIP: Gigabit/100MBit (auto) Ethernet
Data Stream Support
Native:
IPDS (type 4) capabilities including
compressed images
• IBM
Line Mode (IBM
3800-3)
®
®
• Océ Enhanced Line Mode (with LIPS/OLGA)
• IBM
OS/390
V2.0 or higher, Z9 Z/OS
®
®
• IBM
TCP/IP™ for MVS™ 3.2 or higher
®
Optional:
• Xerox
FreeFlow
Print Server. Supports PostScript
®
®
PDF, PCL, TIFF, VIPP
and PPML
®
Options
Scanning Services:
FreeFlow 665 Scanner and
FreeFlow Makeready
6.0
®
Pre- and Post-Processing:
third-party unwinder and post-processing solutions
Workflow:
Xerox FreeFlow Digital
Workflow Collection
Pre- and Post-Processing Control
Print Line Bus™ (PLB):
architecture for components of full print line.
Ensures maximum operator efficiency with ability
to status each component in-line from print engine
touch-screen interface.
Print Line Management™ (PLM):
• Connects each device in print line via a
Print Line Bus (PLB) device
• Monitoring of all devices in print line via the
print engine touch-screen interface
• Up to 10 PLB interfaces per print line
• Enables mix and match of various
pre-/post-vendor devices in same line
Physical Characteristics (per engine)
• Depth: 39.0" (990 mm)
• Width: 117.8" (2,990 mm)
• Height: 61.1" (1,550 mm)
• Weight: 4,321 lb (1,960 kg)
Supported Configurations:
• In-line
• 90 degree turn
• Parallel Z
• Multiplex (3 engines)
Electrical Requirements
Low Voltage Configuration:
• 200/208/230V 67A, 50/60Hz without transformer
• 210/220/240V 67A, 50/60Hz with transformer
• 3 phases, and ground, 4 wires
• Blower unit – 208V 2.0A, 2 phase
• PLB power supply – 110VAC wall plug
• Recommended wall breaker – 100A
High Voltage Configuration:
• 380/400/415V 35A, 50Hz/60Hz with transformer
• 4 wires (cross section 10 sq mm), 3 phases, and
ground, no neutral connection
• Recommended wall breaker – 40A
• Blower unit – 220V/1.9A 50Hz – single phase
• PLB power supply – 220VAC wall plug
Environmental Requirements
Temperature:
,
®
Humidity:
• Working Range 15%RH – 85%RH
• Recommended 30%RH – 65%RH
Power Consumption:
• Operating: Approximately 23KVA
• Stand-by: Approximately 1.6KVA
Support for external
Patented communications
16ºC – 32ºC, 60.8ºF – 90ºF