Xerox Phaser 860 Посібник з налаштування мережі - Сторінка 22

Переглянути онлайн або завантажити pdf Посібник з налаштування мережі для Принтер Xerox Phaser 860. Xerox Phaser 860 42 сторінки. Color printer
Також для Xerox Phaser 860: Посібник зі встановлення лоткового модуля (2 сторінок), Посібник з монтажу (2 сторінок), Посібник з монтажу (1 сторінок), Посібник зі швидкого вивільнення (1 сторінок), Додатковий посібник (1 сторінок), Додатковий посібник (11 сторінок), Брошура та технічні характеристики (4 сторінок), Карта меню (1 сторінок), Посібник з налаштування та короткий довідник (36 сторінок), Посібник з монтажу (1 сторінок), Посібник з експлуатації (11 сторінок)

Xerox Phaser 860 Посібник з налаштування мережі
Setting the Printer's IP Address

Dynamic Host Configuration Protocol

Dynamic Host Configuration Protocol (DHCP) is a system in which UNIX and
Windows NT servers can dynamically allocate IP addresses. The printer is a DHCP client;
when the printer is reset, it receives an IP address from the DHCP server.
Enabling DHCP on the Printer
Make sure that the printer's DHCP protocol is enabled. You can do this from the front
panel; see page 32.

Supported DHCP Fields

The printer recognizes the DHCP fields listed in the following table.
Field
Description
gw
Gateway address list
ha
Hardware address
ht
Hardware type (see
Assigned Numbers
RFC)
ip
IP address
lg
Log host address(es)
sm
Subnet mask
dn
IP domain name
ds
DNS server IP address

Setting the IP Address Using CentreWare IS

After setting the printer's IP address by another method, you can perform the rest of the
TCP/IP configuration using CentreWare IS.
1.
Connect to the printer via CentreWare IS (see page 23).
2.
On the right side of the printer's main CentreWare IS page, click Properties.
3.
On the left side, under Protocols, click TCP/IP.
4.
Enter your printer's settings and click Save Changes at the bottom of the page.
Note
The changes will not take effect until the printer is reset.
16
Values
List of IP addresses separated by spaces.
Hexadecimal; the ha tag must be preceded by the ht tag.
Unsigned decimal, octal, or hexadecimal integer, or one of the
following symbolic names:
For UNIX Ethernet:
ethernet or ether for 10-Mbit Ethernet (DIX encapsulation);
ieee802 for IEEE 802 Ethernet (SNAP encapsulation).
For OS/2 Ethernet:
ether
Single IP address.
List of IP addresses separated by spaces.
Single IP address.
Single domain name.
Printer recognizes up to two IP addresses, separated by spaces.
Phaser 860 Color Printer