Xerox Versant 2100 Press Очікування замовника та інструкція по встановленню - Сторінка 25
Переглянути онлайн або завантажити pdf Очікування замовника та інструкція по встановленню для Принтер Xerox Versant 2100 Press. Xerox Versant 2100 Press 49 сторінок. Entry production color presses
Також для Xerox Versant 2100 Press: Посібник з безпеки (45 сторінок)
Друкувати сторінку
Detailed Specifications
Combination of Output Functions and Destinations
Table Legend:
Function/ Combination of Functions
Offset
Staple
Punch
Interposer
Booklet
Z-Fold
Letter Fold
Bi-Fold
Offset
Staple + Z-Fold
Staple + Interposer
Punch + Z-Fold
Z-Fold + Interposer
Staple + Puncher + Z-Fold
Staple + Punch + Z-Fold + Interposer
*1: Square-folding/trimming of non-stapled sets and square-folding of 4 or less sheets in a set are outside the specification and cannot be assured. Jams may
occur frequently or wrinkles may occur on the square-folded side of paper.
SquareFold Trimmer Skew Specification
Booklet + trimming
Booklet + trimming + square-folding
Standard Finisher Plus
The Standard Finisher Plus provides the same functions as the Standard Finisher, although Stacker Tray capacity is reduced from 3,000 sheets to a
maximum of 2,000 sheets. The Standard Finisher Plus adds a Finishing Transport module which enables connection to available third-party finishing
solutions.
NOTE:
A Standard Finisher cannot be upgraded to a Standard Finisher Plus. Finishing solutions that can be connected to the Standard Finisher Plus
include:
Plockmatic Pro 35/50 Booklet Maker
GBC E-Bind.
Specifications and expectations for these devices are available in a Solutions Planning Guide which is available from your Xerox sales representative or
analyst.
Standard Finisher Plus
Specifications
Customer Expectation and Installation Guide
O: Can be combined
SquareFold Functions
Booklet
X
X
X
O
-
X
X
-
X
X
X
X
X
X
X
Measure both sides of the bottom sheet when the booklet is output.
Staple: |L5-L6| ≤ 2 mm (Achievement rate: 95%)
Bi-Fold/Non-staple: |L5-L6| ≤ 3 mm (Achievement rate: 95%)
Measure both sides of the bottom sheet when the booklet is output.
Staple: |L7-L8| ≤ 2.5 mm (Achievement rate: 95%)
Performance is not guaranteed at Bi-Fold/Non-staple.
For information related to the Standard Finisher Plus, refer to Module Dimensions for Optional Devices.
X: Cannot be combined
Trimmer
Square Fold
X
X
X
X
X
X
O
O
O
O*1
X
X
X
X
O
O*1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Xerox Confidential
Xerox
Output Destination
Booklet Tray
Trimmer Booklet Tray
X
X
X
O
O
X
X
O
X
X
X
X
X
X
X
20
Versant™ 2100 Press
®
X
X
X
O
O
X
X
O
X
X
X
X
X
X
X