Xerox Versant 80 Press Очікування замовника та інструкція по встановленню - Сторінка 12

Переглянути онлайн або завантажити pdf Очікування замовника та інструкція по встановленню для Принтер Xerox Versant 80 Press. Xerox Versant 80 Press 48 сторінок. Entry production color presses
Також для Xerox Versant 80 Press: Посібник з техніки безпеки (26 сторінок), Посібник з безпеки (45 сторінок)

Друкувати сторінку
Xerox Versant 80 Press Очікування замовника та інструкція по встановленню
Detailed Specifications
Paper Feed Length
Media Size
Feed
Direction*
8.5x14 in / B4
SEF
11x17 in / A3
SEF
SEF
12x18 in / SRA3
LEF
8.5x11 in / A4
* LEF = Long edge feed; SEF = Short edge feed
Tray Switching and Mixed Media Test Results
Press Productivity Modes
The Xerox New 80 Press allows the user to select from 2 Productivity Modes that impact the print speed of mixed media jobs. Descriptions of these modes and
test results are cited below. Note – test results refer to Versant 80 speeds without the Performance Package. Performance Package test results will be released in
a future edition of this document.
Optimized for Speed: (Default mode) This mode uses the maximum temperature for the heaviest stock within the job and won't stop to adjust the fuser
temperature.
Optimized for Quality: This mode adjusts the fuser temperature for each stock weight range and the system productivity will slow down to allow the press to
adjust the fuser temperature when necessary.
The following table provides test results on several job types that utilize mixed media and that require paper tray switching. These jobs were tested by Xerox to
provide representative productivity. Results for similar jobs may vary depending on the Print Server, specific media, paper trays, and print mode that are used.
Job Description
10 sheets:
 All 8.5 x 11 in LEF 90 gsm
 Alternating between two trays; 1 sheet per tray
10 sheets:
 All 8.5 x 11 in LEF
 Sheets 1 and 10, 210 gsm
 Sheets 2-9, 90 gsm
3 sheets from different trays:
 All 8.5 x 11 in LEF
 Sheet 1: 200gsm (Tray 1)
 Sheet 2: 90gsm (Tray 2)
 Sheet 3: 90gsm (Tray 3)
30 sheets:
 All 11 x 17 in
 90 gsm uncoated
 Sheets 1-10: Tray 1
 Sheets 11-20: Tray 2
 Sheets 21-30: Tra y 3
23 sheets:
 All 8.5 x 11 in LEF
 90gsm
 4 from tray 1, 1 from tray 3, repeat 3 times
 Then 1 from tray 1, 1 from tray 3, repeat 4 times
225 pages:
 8. 5 x 11 in
 210gsm cover
 90 gsm body with 13
 9 x 11 in tabs
 15 sheets between tabs: Cover, 15 sheets, Tab, 15
sheets, Tab, 15 sheets, Tab, 15 sheets, Cover
Customer Expectation and Installation Guide
Min
Max
11.71 in / 298.1 mm
14.3 in / 365 mm
14.4 in / 366 mm
17 in / 432.0 mm
17.1 in / 431.9 mm
19 in / 482.6 mm
7.2 in / 182.0 mm
8.5 in / 216.0 mm
Configuration or Settings
 Run to HCS and Standard Finisher Stacker Tray with set offset
 Auto Tray Switch Timing set to Tray Near Empty
 Run to Standard Finisher Stacker Tray with set offset
 Auto Tray Switching defined in the job
 1-Sided
 Run to Standard Finisher Stacker Tray with set offset
 Auto Tray Switching defined in the job
 1-Sided
 Run to Standard Finisher Stacker Tray with set offset
 Auto Tray Switching defined in the job
 1-Sided
 Run to Standard Finisher Stacker Tray with set offset
 Auto Tray Switching defined in the job
 1-Sided
 Run to Standard Finisher Stacker Tray with set offset
 Auto Tray Switching defined in the job
Media Type / Weight
Tab Paper (106 - 176 gsm)
Xerox Confidential
Xerox
Versant® 80 Press
®
Press Speed (ppm)
Press Speed Feeding from
Bypass Tray 5 (ppm)
Simplex
Duplex
Simplex
25
13
25
22
11
21
20
10
19
64
32
53
Optimized for
Speed
80
80
80
44
80
75
Duplex
13
11
10
27
Optimized for
Quality
80
13
4
44
80
75
7