Xerox ColorQube 89 Series Посібник з конфігурації - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з конфігурації для Принтер "Все в одному Xerox ColorQube 89 Series. Xerox ColorQube 89 Series 12 сторінок. Usb card reader configuration guide for workcentre 51 series, workcentre 6400, workcentre 56 series, workcentre 75 series, workcentre 57 series, workcentre 77 series, colorqube 87 series, colorqube 89 series, colorqube 92 series, colorqube 93 series
Також для Xerox ColorQube 89 Series: Посібник (32 сторінок)

Друкувати сторінку

1. Elatec Twn3 Software

RF IDeas Magnetic Stripe Reader Configuration Upgrade

RF Ideas magnetic stripe readers can be configured with the pcSwipe tool available from their website

(http://www.rfideas.com). Select Support / Software & Downloads then scroll down to pcSwipe®

Magnetic Card Reader. Download and install pcSwipeConfig.exe.

1) Connect the reader to the workstation and run the pcSwipe tool.

a) Select the Scan/Connect button so the tool will interrogate the reader.

2) Once a reader has been recognized, select the Fields tab

a) In the Tracks field, enable tracks 1, 2 & 3.

b) Select User Field 1, and insure that the checkbox next to "Show Sentinels and Separators" is

selected.

c) Select User Field 2 and then 3 and insure the "Show Sentinels and Separators" field is selected

for those as well.

d) Select User Field 4

e) Insure the checkbox next to "Enable" is selected.

Verify that the word <ENTER> appears in the text field adjacent to the User Field 4 button. This

is the termination to the data stream.

g) If <ENTER> does not appear, select the keyboard icon on the left labeled "Keys"

h) Within the pop up which will appear, select <ENTER> and then "Insert".

3) Select the LED/Beep tab.

a) Verify that the LED and tone response match the customer's desired behavior

b) When all configuration options have been set, this can be written to the reader.

c) From the pcSwipeConfig toolbar, select the Flash icon

d) The reader will beep and blink and beep when the new settings have been written.

10 USB Card Reader Configuration Guide