Calex PyroNFC Series Посібник оператора - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник оператора для Аксесуари Calex PyroNFC Series. Calex PyroNFC Series 9 сторінок.
Друкувати сторінку
The PyroNFC is a non-contact infrared temperature sensor with Near Field Communication
(NFC) capability. It has linear voltage and open collector alarm outputs for connection to
industrial process instrumentation.
By touching an NFC-enabled smartphone against the back of the sensor, the user can
configure the sensor's settings, and read the measured temperature, via a free app.
SPECIFICATIONS
General
Temperature Range
Outputs
Field of View
Accuracy
Repeatability
Response Time
Configuration
Emissivity Setting
Emissivity Setting Range
Max Temperature Span (Linear Output)
Min Temperature Span (Linear Output)
Spectral Range
Max. Supply Voltage
Min. Supply Voltage (at Sensor)
Max Current Draw
Warm Up Time (PN151K)
Environmental & Conformity
Environmental Rating
Ambient Temperature Range
Relative Humidity
Electromagnetic Compatibility (EMC)
RoHS Compliant
App
Configurable Parameters
Temperature Units
Signal Processing
Real Time Temperature Reading
2
0 to 1000°C
Model PN151: 0-5 V DC, 1-5 V DC or 0-10 V
DC output, linear with measured temperature,
configurable and rescalable via NFC
Model PN151K: Type K Thermocouple
15:1 (see OPTICS)
± 1.5% of reading or ± 1.5°C, whichever is greater
± 0.5% of reading or ± 0.5°C, whichever is greater
125 ms
Via iOS or Android app using NFC-equipped
device (e.g. smartphone or tablet)
Adjustable via app
0.2 to 1.0
1000°C
100°C
8-14 µm
28 V DC
12 V DC (for 10 V output)
6 V DC (for 5 V output)
7 mA
Allow 10 seconds after power-on before a reading
is observed.
IP65
0°C to 80°C
95% max. non-condensing
EN61326-1, EN61326-2-3 (Electrical Equipment
for Measurement, Control and Laboratory Use -
EMC Requirements - Industrial)
Yes
Temperature range
Linear voltage output type and scale
Alarm output threshold and hysteresis
Emissivity setting
Reflected temperature
°C / °F
Averaging Period (0.125 to 60 seconds)
Peak / Valley Hold
Hold Period (0.125 to 120 seconds)
Hold NFC device against sensor for continuous in- app
temperature updates