Direct power DPB053STM Посібник з техніки безпеки та експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з техніки безпеки та експлуатації для Електроінструмент Direct power DPB053STM. Direct power DPB053STM 17 сторінок. 2000w wallpaper stripper

PLUG REPLACEMENT

If you need to replace the fitted plug then follow
the instructions below.
Important
The wires in the mains lead are coloured in
accordance with the following code:
Green & yellow - Earth
Blue - Neutral
Brown - Live
As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows. The wire which is
coloured green & yellow must be connected to
the terminal which is marked with E or
.
The wire which is coloured blue must be
connected to the terminal which is marked with
N. The wire, which is coloured brown, must be
connected to the terminal, which is marked with
the letter L.
Warning: Never connect live or netutral wires
to the earth terminal of the plug. Only fit an
approved 13 Amp BS1363/A plug and the correct
rated fuse.
Note: If a moulded plug is fitted and has to be
removed take great care in disposing of the
plug and severed cable, it must be destroyed to
prevent engaging into a socket.
If the supply cord is damaged it must be replaced
by a service agent or a similarly qualified person
in order to avoid hazard.
TWS200-M-070924.indd 12
2007-9-25 15:45:04