Xerox DocuColor 2240 Вказівки з техніки безпеки - Сторінка 5

Переглянути онлайн або завантажити pdf Вказівки з техніки безпеки для Ксерокс. Xerox DocuColor 2240. Xerox DocuColor 2240 15 сторінок. Scan using ftp server
Також для Xerox DocuColor 2240: Посібник зі швидкого підключення (2 сторінок), Технічні характеристики (2 сторінок), Посібник із швидкого старту (4 сторінок), Посібник із швидкого старту (4 сторінок), Посібник із швидкого старту (6 сторінок), Посібник користувача (36 сторінок), Посібник з експлуатації (18 сторінок), Посібник з усунення несправностей (28 сторінок)

Друкувати сторінку
Xerox DocuColor 2240 Вказівки з техніки безпеки

Maintenance Safety

Operational Safety

•
Do not attempt any maintenance procedure that is not
specifically described in the documentation that is supplied
with your press.
•
Do not use aerosol cleaners. The use of supplies that are not
approved may cause poor performance of the press, and
could create a dangerous condition.
•
Use the supplies and cleaning materials only as directed in
this manual. Keep all of these materials out of the reach of
children.
•
Do not remove the covers or guards that are fastened with
screws. There are no parts behind these covers that you can
maintain or service.
Do not perform any maintenance procedures unless you have
been trained to do them by a Xerox representative, or unless a
procedure is specifically described in one of the manuals included
with your press.
Your Xerox equipment and supplies were designed and tested to
meet strict safety requirements. These include safety agency
examination, approval, and compliance with established
environmental standards.
Your attention to the following safety guidelines will help ensure
the continued safe operation of your digital press:
•
Use the materials and supplies specifically designed for your
digital press. The use of unsuitable materials may result in
poor performance of the machine and possibly a hazardous
situation.
•
Follow all warnings and instructions that are marked on or
supplied with the machine.
•
Place the machine in a room that provides adequate space for
ventilation and servicing.
•
Place the machine on a level, solid surface (not on a thick pile
carpet) that has adequate strength to support the weight of the
machine.
S
N
A F E T Y
O T I C E S
i ii