Xerox DocuColor 260 Примітка до випуску - Сторінка 7

Переглянути онлайн або завантажити pdf Примітка до випуску для Ксерокс. Xerox DocuColor 260. Xerox DocuColor 260 41 сторінка. Docucolor advanced multifunction
Також для Xerox DocuColor 260: Посібник з експлуатації (12 сторінок), Посібник користувача (32 сторінок), Технічні характеристики (8 сторінок), Посібник для оцінювачів (14 сторінок), Посібник для оцінювачів (16 сторінок)

Page 7

Networking

Changing network settings

If you change any network settings in Setup from the copier control panel, the Fiery Color

Server reboots. The Fiery Color Server loses connection with the copier until it has finished

restarting, which takes a minute or two. You can determine whether the connection has been

restored by pressing the All Services button on the copier touch panel. If the Network

Scanning button is grayed out, the connection has not yet been restored.

Printing over IPv6

To print to the Fiery Color Server over IPv6, use the lpr command from the Command

Prompt in Windows. For example, use this syntax:

lpr -S <IPv6 address or name> -P print <file name>

Printing with SMB over IPv6 is not supported.

IP Sec Preshared key cannot be reset

If you enable IP Sec (Internet Protocol Security) and enter and save a Preshared key in

Network setup, the Preshared key cannot be reset and the field cannot be returned to the

blank default. If you attempt to reset the Preshared key (regardless of whether or not the IP

Sec option is enabled), you receive an error message of invalid entry for this field.

GSSAPI authentication

GSSAPI is always used for WebTools Docs, WebTools Scan Settings and Driver

Authentication.

In LDAP configuration, specify "Kerberos realm" in the domain field.

The WebTools Docs and Driver User Authentication login for LDAP requires the user name

entry to be in the following format: kerberosRealm\username

Using "windows domain name" instead of the kerberos realm may not necessarily work

OTE

all the time. The Fiery Color Server tries to map similarly named Windows domain name and

Kerberos realm, but it does not work in all the cases. For example, the Company A Windows

domain name (coma) and Kerberos realm (US.COMPANY.NET) are different, and it can be

difficult to map one to another:

Other limitations to using GSSAPI authentication are:

• The time set on the Fiery Color Server and the LDAP server should be within five

minutes.

• The Fiery Color Server must be able to resolve LDAP server name.

• Kerberos realm name must be upper-case.