Xerox Document Centre 230 Початок роботи - Сторінка 18

Переглянути онлайн або завантажити pdf Початок роботи для Ксерокс. Xerox Document Centre 230. Xerox Document Centre 230 48 сторінок. Xerox document centre 230: install guide
Також для Xerox Document Centre 230: Швидке встановлення (1 сторінок), Огляд сканування (2 сторінок), Посібник зі швидкого встановлення (8 сторінок), Посібник з інсталяції (2 сторінок)

Set Up Options

There are two procedures that can be used to successfully set up

scanning. Read the information below and choose the procedure

that you will use to complete the installation:

Output Image Quality

Page 2 - 2

Set Up Scanning

To complete the native implementation of scanning for your

NetWare environment, go to the section of this chapter titled Set

Up Scanning now.

Use Xerox CentreWare Internet Services

Xerox's CentreWare Internet Services is accessed through the

embedded HTTP server on the DC220/230/332/340ST that

allows System Administrators and users to configure scan

settings. This is accomplished by using an Internet browser such

as NetScape (version 3.x or later) or Microsoft Internet Explorer

(version 4.x or later).

Using Internet Services, you can:

Create new scan templates

Update existing scan templates

Modify scan configurations (including document repository

locations), enable and disable Confirmation Sheets, and

change Filing Protocols.

Enable Multi-Page TIFF, which will create a single TIFF

file for a multi-page document, instead of one TIFF file for

each page

Multi-Page TIFF can be enabled using Xerox CentreWare

Internet Services. When Multi-Page TIFF is enabled, a single

TIFF file will be created for a multi-page document. This

single TIFF file will contain all the pages of the document. An

.XSM folder is not created when scanning in the Multi-Page

TIFF mode. A single TIFF file and a log file (.xst) are stored in

the repository for each multi-page document that is scanned.

Companion to Getting Started with Scanning Services