Color Inserts
REGAL 5790 MATERIALS USAGE GUIDE
•
The 4mm Lead Edge Deletion selection is not available for
Special two-sided copying. The copier/printer automatically
selects 8mm. The Book Mode, Poster, and Transparency
Interleave features are not available for Special two-sided
copying.
•
If the Image Shift or Corner Shift feature is selected with two-
sided copying, change the horizontal shift direction on side 2 to
the opposite of the side 1 position.
Example: If you shift the side 1 image 0.5 inches (13mm) to the
right, the side 2 image should be shifted 0.5 inches (13mm) to
the left. Top and bottom image shift positions do not have to be
changed, however if the original document is rotated 90 degrees
on the Document Glass, then the side 2 image should be shifted
to the vertically opposite direction.
•
As mentioned above, heavy-weight and coated papers are not
recommended for Duplex copying due to their variable curl on
side 1, and image quality problems when running side 2. In
many cases, however, good results have been seen with 32 lb
paper and even 90 lb Index. The level of success depends
largely on the exact paper being used, how it is loaded, the
image being used, and the unique variables in each machine. If
attempting to duplex these materials, refer to the Hints and Tips
sections for Heavy-Weight and Coated papers for more specific
directions. Results with these papers cannot be guaranteed
and nothing can be done to improve performance if it is not
satisfactory.
Application Description & Expectations
Color Inserts refers to merging color copies made on the 5790 with
black and white documents being printed on a Xerox DocuTech
Model 135 or a Xerox 5090 Duplicator. If you want to use 5790
color copies in another model Xerox copier/printer, inform your
Xerox service representative and try a few copies to determine the
results before running a job.
Recommended Materials
Xerox 24 lb Image Series LX , 8.5 x 11" = 3R3874
Xerox 24 lb Image Series LX , 11 x 17" = 3R3877
APPLICATIONS
25
Друкувати сторінку