Xerox WorkCentre M45 Технічні характеристики - Сторінка 8

Переглянути онлайн або завантажити pdf Технічні характеристики для Ксерокс. Xerox WorkCentre M45. Xerox WorkCentre M45 11 сторінок. Copier-printers
Також для Xerox WorkCentre M45: Брошура (2 сторінок), Встановлення та експлуатація (3 сторінок)

Xerox WorkCentre M45 Технічні характеристики
OUTPUT OPTION—Office Finisher Option
Top Tray
Stacking Tray
Sizes
Weights
Stapling
Hole Punching
(optional)
FAX (optional)
Compatibility
Speed/Modem (s)
Speed/Compression
Fax Send Features
Fax Receive Features
Fax Reports
Fax Receive Mailboxes
Auto Dialing
Capacity:* 250 sheets
Capacity:* 2,000 sheets
4.25 x 5.5"/A6 to 11 x 17"/A3
16 lb bond to 80 lb cover/60 to 216 gsm
Single (any corner) and dual
Auto stapling (50 sheets maximum)
Offline stapling (40 sheets maximum)
Statement, letter, legal, tabloid, A5, A4, A3 sizes supported
Two** and three hole (N. America); two or four hole (Europe)
ITU (CCITT) Group 3 quality/resolution of 600 x 600, 400 x 400, 300 x 300, 200 x 200, 200 x 100 dpi
One or two V.34 modems: 33,600 bps. Less than four seconds per page transmission time. ISDN via third-party adapter.
MMR, MR, MH
Auto fax transmission reduction
Page-by-page job status at the machine
Fax from platen
Delay start
Automatic memory resend
Automatic cover sheets
Priority send
Broadcast
One- or two-sided printing, stapled or unstapled
Reduction at reception to fit available paper
Junk fax prevention
Activity report
Broadcasting/Multipoll
Dial directory
Transmission confirmation
Pending fax
Mailbox
Up to 200 password-protected mailboxes
Total of 200 speed dials (single-line option) or 1,000 speed dials (dual-line option)
Up to 100 dial groups with up to 200 recipients per group (single-line option)
Up to 200 dial groups with up to 400 recipients per group (dual-line option)
Auto redial
Batch send
WorkCentre
®
M35/M45/M55 Copier-Printers
*Paper capacities are based on 20 lb bond/75 gsm stock; capacities will vary with different weight stocks.
WorkCentre
®
M35/M45/M55
**Not available at product introduction.
8