Xerox 721 Посібник з навчання клієнтів - Сторінка 36

Переглянути онлайн або завантажити pdf Посібник з навчання клієнтів для Аксесуари для принтерів Xerox 721. Xerox 721 50 сторінок. Software tools
Також для Xerox 721: Посібник оператора (11 сторінок), Посібник з налаштування (20 сторінок), Примітка до випуску (23 сторінок), Примітка до випуску (8 сторінок)

Machine observations - feedback sheet

1. Select a document and scan it. Observe the

following icons:

2. What happens to the arrow? What does the dark

area signify?

The arrow becomes partially filled with a dark

area. Then the arrow becomes empty again.

The dark area represents the amount of

Random Access Memory (RAM) used.

3. What then happens to the cylinder?

The cylinder becomes partially filled with a

dark area.

4. What does the dark area on the cylinder signify?

The dark area signifies the amount of hard disk

space being used by stored files.

5. Press the Mode key and observe the three LEDs

in the Media Selection part of the scanner control

panel. Press the Mode key again.

What happened? Why?

The LEDs extinguished when the Synergix

Scan System was in SCAN mode. This is

because those features are disabled in SCAN

mode.

6. Before you select the Sets Build key, does the

Scan System need to be in Copy Mode or Scan

Mode?

Copy Mode. (If you have it in Scan Mode,

multiple beeps are heard, because Sets Build is

not a valid operation in SCAN mode.)

FreeFlow Accxes Software Tools Training Guide