Xerox DocuColor 40 Додатковий посібник - Сторінка 9
Переглянути онлайн або завантажити pdf Додатковий посібник для Аксесуари для принтерів Xerox DocuColor 40. Xerox DocuColor 40 17 сторінок. High speed paper-backed transparencies
Також для Xerox DocuColor 40: Посібник з використання (12 сторінок), Довідковий посібник (13 сторінок), Посібник з налаштування (8 сторінок), Посібник з налаштування (4 сторінок), Інструкція по застосуванню (1 сторінок)
Друкувати сторінку
Xerox DocuColor 40/30 Family Digital Color Production System
Stacker/Stapler:
The Stacker/Stapler operates in three modes:
1. Copies made from the DocuColor 40/30 will be offset
per job and stacked.
2) Prints made from a digital front end can be stapled
per set and stacked, or stacked and offset without
stapling.
3) The Stapler can be used as an off-line convenience
stapler.
The total number of copies per stapled set is 50 for
normal weight paper and 40 for heavy weight or coated
paper. If the stack of paper exceeds 5 mm, the number of
sheets should be reduced to produce an efficient staple.
When sets are automatically stapled, the quantity is
controlled by the DocuColor 40/30.
The capacity of the Stacker catch tray is 1000 sheets of
8.5" x11" and 500 sheets of 11" x17" or larger 24 lb. Bond.
The exact quantity will vary with the paper weight.
When stapling small sets, the stacking capacity may be
reduced due to the thickness of the staple vs. the
thickness of the paper. Example, two page sets will stack
100 sets and 20 page sets will stack 50 sets.
The Stacker/Stapler requires an additional grounded
power source within reach of the 8 foot power cord that is
provided with the Stacker/Stapler.
The Stacker/Stapler supports the following paper sizes:
Customer Expectations Setting Guidelines
Face-Up Feature
Face-Down Feature
12 x 18 inch paper may be fed from the MSI into the
Stacker by using the face up feature.
The following table shows the sizes of paper that can be
stapled:
Common
Name
American
American
American
B5
A4
-
20-Bin Sorter:
The sorter capacity for 28 lb. bond is 50 sheets of paper
per bin and 200 sheets in the Top Tray.
All sheets are delivered to the Top Tray unless otherwise
specified – sorted materials must be specifically invoked.
Transparencies and interleaves are delivered to the clear
Transparency Tray on the top of the sorter bins.
Heavyweight paper fed from the MSI will be delivered to
the Top Tray.
9
X Axis
182 to 432 mm
140 to 297 mm
(7.2 to 17 inches)
(5.5 to 11.7 inches)
182 to 432 mm
182 to 297 mm
(7.2 to 17 inches)
(7.2 to 11.7 inches)
Size in
Size in
Inches
Millimeters
11x8.5
279x216
10.5x8
267x203
10x8
254x203
10.12x7.16
257x182
11.69x8.27
297x210
11x17
279x432
Version 6.0
Y Axis
Paper
Orientation
LEF
LEF
LEF
LEF
LEF
Will not be
stapled
09/08/99