Xerox DocuPrint N40 Швидкий монтаж - Сторінка 10

Переглянути онлайн або завантажити pdf Швидкий монтаж для Аксесуари для принтерів Xerox DocuPrint N40. Xerox DocuPrint N40 10 сторінок. Supplies/options
Також для Xerox DocuPrint N40: Посібник з експлуатації (15 сторінок), Додатковий посібник (2 сторінок), Технічні інструкції (10 сторінок)

Release the two brackets under the Paper

Transport and rotate them up into place at

the edge of the Paper Transport.

Lower the Paper Transport so that it hangs

against the side of the finisher.

Remove the Emissions Bracket Assembly

from the printer console by removing the

two thumb screws.

X e r o x D o c u P r i n t N 2 4 , N 3 2 , a n d N 4 0 F i n i s h e r

Free the Guide Rail from the base of the

printer console by pushing in the two tabs

on the #2 bracket while pushing down on

the Guide Rail.

Remove the Guide Rail from under the

printer.

Remove the Transport Cover. Begin by

lifting the roller guard and rotating the

Transport Cover away from the edge of the

printer until the connecting tabs pull free.

Reattach the GFI power cord to the Printer.

Power ON the Printer.

Print a Configuration Sheet and confirm

that the finisher no longer appears in the

upper right section of the sheet.

CAUTION: If you plan to ship the

finisher, remove the Staple Cartridge

before shipping.